HoKa Plastic bend with sockets 45°

Description

Available in the materials:

PVCPVC white PPs PP-H PE-HD PP-EL-s PVDF
HoKa Bend with sockets 45°

Technical drawings

Rohrbogen mit Muffen 45°
Rohrbogen mit Muffen 45°
PVC from Ø 700 mm, PE-HD/PP-H/PPs from Ø560 mm, PP-EL-s and PVDF from Ø 450 mm are manufactured as segmental bends.

Technical data

  PVC PE-HD/PP-H/PPs/PP-EL-s/PVDF
Ø L Tolerance Ø min. s L Tolerance Ø min. s
50 25 0,3 1,8 25 0,7 3,0
63 25 0,3 1,8 25 0,7 3,0
75 40 0,3 1,8 40 0,7 3,0
90 40 0,3 1,8 40 0,9 3,0
110 40 0,3 1,8 40 1,0 3,0
125 40 0,3 1,8 40 1,2 3,0
140 40 0,4 1,8 40 1,3 3,0
160 40 0,4 1,8 40 1,5 3,0
180 40 0,4 1,8 40 1,7 3,0
200 40 0,4 1,8 40 1,8 3,0
225 40 0,5 1,8 40 1,9 3,5
250 40 0,5 2,0 40 2,0 3,5
280 50 0,6 2,3 50 2,2 3,5
315 50 0,6 2,5 50 2,4 4,0
355 50 0,7 2,9 50 2,7 4,0
400 50 0,7 3,2 50 3,0 4,5
450 50 0,8 3,6 50 3,5 5,0
500 50 0,9 4,0 50 4,0 5,0
560 - - - 60 4,5 5,0
600 60 1,0 6,0 60 4,5 6,0
630 - - - 70 4,5 6,0
700 70 2,5 6,0 70 4,5 6,0
710 - - - 80 4,5 6,0
800 80 3,0 8,0 80 4,5 8,0
900 90 3,0 8,0 90 4,5 8,0
1000 100 4,0 10,0 100 5,0 10,0
1200 120 4,0 12,0 120 5,0 12,0
1250 130 4,0 12,0 130 5,0 12,0
PVC from Ø 700 mm, PE-HD/PP-H/PPs from Ø560 mm, PP-EL-s and PVDF from Ø 450 mm are manufactured as segmental bends.

Tender specification

Tender specification PVC

HOKA PVC 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8062, R=D manufacturing process: Ø 50 to 400 mm injection moulding, Ø 450 to 600 mm patented blow moulding, from Ø 700 segment welded. Possible negative   overpressure upon request according to mechanical, chemical, and thermal load.

Tender specification PVC white

HOKA PVC white 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8062, R=D manufacturing process: Ø 50 to 400 mm injection moulding, Ø 450 to 600 mm patented blow moulding, from Ø 700 segment welded. Possible negative   overpressure upon request according to mechanical, chemical, and thermal load.

Tender specification PE-HD

HOKA PE-HD 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8074, R=D manufacturing process: Ø 50 to 400 mm injection moulding, Ø 450 to 500 mm patented blow moulding, from Ø 560 segment welded. Possible negative   overpressure upon request according to mechanical, chemical, and thermal load.

Tender specification PP-H

HOKA PP-H 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8077, R=D manufacturing process: Ø 50 to 400 mm injection moulding, Ø 450 to 500 mm patented blow moulding, from Ø 560 segment welded. Possible negative  overpressure upon request according to mechanical, chemical, and thermal load.

Tender specification PP (flame restistant)

HOKA PP (flame resistant) 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8077, R=D manufacturing process: Ø 50 to 400 mm injection moulding, Ø 450 to 500 mm patented blow moulding, from Ø 560 segment welded. Possible negative   overpressure upon request according to mechanical, chemical, and thermal load.

Tender specification PVDF

HOKA PVDF 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN ISO EN 10931, R=D manufacturing process: Ø 50 to 400 mm injection moulding. Possible negative   overpressure upon request according to mechanical, chemical and thermal load.

Tender specification PP-EL-s

HOKA PP-EL-s 45° bend with socket plastic fitting round with interior stop for connecting pipes in an exhaust system by welding process. Socket inside diameter on the basis of DIN 8077, R=D manufacturing process: Ø 50 to 400 mm injection moulding, Ø 450 to 500 mm patented blow moulding, from Ø 560 segment welded.  Possible negative  overpressure upon request according to mechanical, chemical, and thermal load.